Shop All
DURAVEX 9100
Increments of 1
Minimum of 1
Maximum of
0Low stock
0In stock, ready to ship
Sale price
$102.00
Regular price
Regular price
$102.00
Unit price
per
Couldn't load pickup availability
Fast Shipping
Free Returns
Best Deals
Get notified by email when this product becomes available
Have a question?
Description
Premium Hybrid Sealer
ARMOVEX DURAVEX™ 9100 is a clear, single-component, water-based hybrid sealer engineered for long-term protection. It penetrates concrete and compatible substrates while forming a breathable, non-yellowing protective film at the surface.
Its hybrid penetrating and film-forming technology protects concrete and multiple substrates from wear and contamination, reducing water absorption, staining, oil penetration, and salt intrusion that contribute to surface deterioration. The product may appear milky when wet and dries clear.
Specifications
| Type | Hybrid penetrating + film-forming sealer |
|---|---|
| Coverage | About 200 sq ft per gallon, two coats |
| VOC | Low VOC |
| Finish | Clear, non-yellowing |
| Dry to touch / recoat | 10–30 minutes |
| Light foot traffic | 4–6 hours |
| Heavy or vehicle traffic / full cure | 24–72 hours |
| Application temperature | 50°F (10°C) to 120°F (49°C) |
| Sizes | 1 gal · 2.5 gal · 5 gal |
Where to Use It
- Residential and commercial concrete
- Warehouses and retail spaces
- Pavers and decorative concrete
- Natural stone, terrazzo, masonry and brick
- Asphalt, wood, metal, and epoxy and resinous floors
Application
Surface must be clean, dry, and free of contaminants. Protect adjacent areas from overspray or runoff. Always test in an inconspicuous area before full application.
Apply two coats evenly with a sprayer, roller, or approved tools. Do not allow puddling. Do not shake the product before use. Allow the first coat to dry 10–30 minutes (dry to touch) before the second coat. Light foot traffic after 4–6 hours; heavy or vehicular traffic after 24–72 hours.
Do not apply below 50°F (10°C) or above 120°F (49°C). Apply when the surface is at least 5°F (3°C) above the dew point. Avoid application during rain or high humidity, or when condensation or standing water is present. Do not allow the product to contact glass; if contact occurs, wipe immediately with water. Clean tools and equipment with water immediately after use. Store in a cool, dry area out of direct sunlight, tightly sealed, and protected from freezing. Shelf life is two years when properly stored.
Frequently Asked Questions
How much coverage?
About 200 sq ft per gallon, two coats.
Is it low VOC?
Yes. DURAVEX 9100 is a water-based, low-VOC formula. The technical data sheet states it is non-hazardous and non-toxic when used as directed, and that it contains no solvents, APEO, benzophenone, formaldehyde, or PFAS.
How long does it last?
When applied in accordance with manufacturer specifications and used under normal service conditions, it is engineered to provide up to 5–7 years of service life before recoating.
No A and B components.
No Profile Needed on properly cleaned concrete.