{"product_id":"armovex-invisible-seal","title":"ARMOVEX Invisible Seal","description":"\u003ch2\u003eSeal the Concrete, Keep the Look\u003c\/h2\u003e\n\u003cp\u003eMost sealers protect concrete by covering it, which means gloss, a wet look, slick spots when it rains and a coating that eventually peels. ARMOVEX Invisible Seal works the other way: it goes down into the concrete and closes it up from the inside, so water, salt and spills have a much harder time getting in, while the surface looks exactly as it did before.\u003c\/p\u003e\n\u003cp\u003eThere is no film build at all, so there is nothing to wear off, flake or strip. Invisible Seal is made for exterior concrete and masonry exposed to sun and weather, and for interior floors you want protected without a coated finish. It is UV stable and non-yellowing and does not reduce skid resistance.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"ax-specs\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJob\u003c\/th\u003e\n\u003ctd\u003ePenetrating protection for exterior and interior concrete and masonry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eInvisible: no film build, gloss or color change\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInterior and exterior, horizontal and vertical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUV\u003c\/th\u003e\n\u003ctd\u003eUV stable, non-yellowing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e400 sq ft per gallon, per coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCoats\u003c\/th\u003e\n\u003ctd\u003e2 coats (400 sq ft per gallon each coat)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVOC\u003c\/th\u003e\n\u003ctd\u003eZero VOC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCertifications\u003c\/th\u003e\n\u003ctd\u003eGREENGUARD Gold certified · Health Product Declaration (HPD) listed · SCAQMD compliant · Buy American Act and Build America, Buy America (BABA) compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eApply between\u003c\/th\u003e\n\u003ctd\u003e32°F and 120°F (0–48°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eClean-up\u003c\/th\u003e\n\u003ctd\u003eWarm, soapy water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShelf life\u003c\/th\u003e\n\u003ctd\u003eIndefinite when sealed, stored cool and dry; do not freeze\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSizes\u003c\/th\u003e\n\u003ctd\u003e1 gal · 5 gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhere to Use It\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDriveways, sidewalks, walkways and patios\u003c\/li\u003e\n\u003cli\u003eSteps, entries and other exterior flatwork\u003c\/li\u003e\n\u003cli\u003eStamped, colored, broom-finished and exposed-aggregate concrete\u003c\/li\u003e\n\u003cli\u003eBrick, block, mortar and masonry walls\u003c\/li\u003e\n\u003cli\u003eParking and podium decks\u003c\/li\u003e\n\u003cli\u003eInterior garage, shop and basement floors that should stay bare concrete\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePrep\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eClean the concrete of dirt, oil, grease, paint and any existing sealer or coating; it has to be able to soak in.\u003c\/li\u003e\n\u003cli\u003eAfter pressure washing, wait at least 24 hours for the surface to dry.\u003c\/li\u003e\n\u003cli\u003eMask windows, metal railings, doors and landscaping from overspray.\u003c\/li\u003e\n\u003cli\u003eDo not apply over standing water. Outdoors, check that no rain is expected before the surface dries.\u003c\/li\u003e\n\u003cli\u003eTest a small area first. Clean concrete absorbs it right away; if it beads, clean again.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eCoat 1: spray evenly at 400 sq ft per gallon with a pump or airless sprayer until fully wet, without puddles. On walls, work top to bottom with a short, controlled run.\u003c\/li\u003e\n\u003cli\u003eLet coat 1 dry to the touch.\u003c\/li\u003e\n\u003cli\u003eCoat 2: spray again at 400 sq ft per gallon, paying attention to areas that absorb quickly.\u003c\/li\u003e\n\u003cli\u003eIf any spot of coat 2 dries in under 15 minutes, keep re-applying there until it stays saturated for at least 15 minutes.\u003c\/li\u003e\n\u003cli\u003eIf rain interrupts the job, mark where you stopped and pick up there once the surface is dry.\u003c\/li\u003e\n\u003cli\u003eWash tools and sprayer right away with warm, soapy water.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWill it change the color or shine of my concrete?\u003c\/h3\u003e\n\u003cp\u003eNo. Invisible Seal penetrates and leaves no coating, so there is no gloss, wet look or color change. The surface looks the same once it dries.\u003c\/p\u003e\n\u003ch3\u003eIs it made for outdoor concrete?\u003c\/h3\u003e\n\u003cp\u003eYes. It is designed for interior and exterior use on horizontal and vertical surfaces, and it is UV stable and non-yellowing.\u003c\/p\u003e\n\u003ch3\u003eWill it make the surface slippery?\u003c\/h3\u003e\n\u003cp\u003eNo. Nothing is left on top, and skid resistance is not reduced.\u003c\/p\u003e\n\u003ch3\u003eHow much product do I need?\u003c\/h3\u003e\n\u003cp\u003ePlan on 2 coats at 400 sq ft per gallon per coat. A 400 sq ft patio needs about 2 gallons in total (1 gallon for each coat).\u003c\/p\u003e\n\u003ch3\u003eWhat if parts of the second coat soak in fast?\u003c\/h3\u003e\n\u003cp\u003eIf any area of the second coat dries in under 15 minutes, keep re-applying there until it stays wet for at least 15 minutes.\u003c\/p\u003e\n\u003ch3\u003eIs it safe to use around my home?\u003c\/h3\u003e\n\u003cp\u003eInvisible Seal is Zero VOC, solvent-free and non-hazardous, and it is GREENGUARD Gold certified. Tools clean up with warm, soapy water.\u003c\/p\u003e\n\u003ch3\u003eHow is it different from DURAVEX 9500?\u003c\/h3\u003e\n\u003cp\u003eDURAVEX 9500 is a clear topical sealer with a urethane booster that leaves a protective finish. Invisible Seal leaves no film at all, for when you want protection with no visible change.\u003c\/p\u003e\n\u003cp\u003e Prefer a clear protective finish? See DURAVEX 9500.\u003c\/p\u003e\n\u003cp\u003eNo A and B components.\u003c\/p\u003e\u003cp\u003eNo Profile Needed on properly cleaned concrete.\u003c\/p\u003e","brand":"Armovex","offers":[{"title":"1 Gallon","offer_id":67937619018043,"sku":null,"price":155.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallon","offer_id":67937619050811,"sku":null,"price":565.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/4169\/3755\/files\/armovex-invisible-seal-1gal-label.png?v=1794288599","url":"https:\/\/shopcoatinghouse.com\/products\/armovex-invisible-seal","provider":"Coating House","version":"1.0","type":"link"}